FLAT
Fabrication of customized optical flats from a wide range of optical substrates, for a variety of applications in Industrial, Medical and Defence.
Precision quality flat, parallel or wedged, in assortment of sizes and shapes.
Flats Manufacturing Capabilities:
| Parameters | Typical specification | Precision specification |
|---|---|---|
| Diameter (3 ~ 200mm) | +0/- 0.03 mm | +0/-0.010 mm |
| Parallelism | < 1’ | < 1” |
| Irregularity on diameter any 30 mm | < 0.3 Fringe | < 0.15 Fringe |
| Irregularity on diameter any 50 mm | < 0.5 Fringe | < 0.25 Fringe |
| Surface defects (ISO 10110) | 5/3 x 0.25 | 5/2 x 0.16 |
| Surface defects (MIL-O-13830) | 60-40 | 10-5 |
Note: The capability in achieving a specific requirement is affected by other factors.
Please contact us for more details.
RETICLES
- Circular, transparent glass elements with a system of lines, dots, circles, or crosshairs for fine measurement or alignment in sighting applications.
- Customized for used in Telescopes, Microscopes, Oscilloscope screens, Riflescopes and Rangfinders.
POLARIZERS
- Linear and Circular
- Available mounted and un-mounted
MIRRORS
- Coated with Silver, Aluminium & other materials.
- Used in Imaging and Auto-collimating
WINDOWS
- Customized Windows for all UV-IR applications.
- From common to high demand Surface Quality and Flatness.
- Used in Interferometer and Electronic Sensors or Detectors as a protective shield.
FILTERS
- Standard and High quality customized filters
- For UV
- IR applications
- Neutral Density
- Polarizing
PRISMS
Manufacture various type of prisms to customers’ specifications from a wide range of optical glass, and supported by our in-house cementing and coating processes to achieve the ultimate performance for imaging systems and laser applications.
Prims Manufacturing Capabilities:
| Parameters | Typical specification | Precision specification |
|---|---|---|
| Size – width & length (10 ~ 70 mm) | +0/- 0.1 mm | +0/-0.010 mm |
| V height | < 1’+/- 0.05 mm | < 1”+/- 0.02 mm |
| Angles | < 1’ | < 3” |
| Pyramidal error | < 3’ | < 1’ |
| Irregularity on diameter any 20 mm | < 0.3 Fringe | < 0.15 Fringe |
| Irregularity on diameter any 50 mm | < 0.5 Fringes | 10-5<0.25 Fringe |
| Surface defects (ISO 10110) | 5/3 x 0.25 | 5/2 x 0.16 |
| Surface defects (MIL-O-13830) | 5/3 x 0.25 | 5/2 x 0.16 |
Note: The capability in achieving a specific requirement is affected by other factors.Please contact us for more details.
RIGHT ANGLE PRISM
- To deviate the light path by 90° or 180°.
- Used in Telescope, Periscope, Microscopy, Medical Instrument and other optical system.
RHOMBOID PRISM
- To displace the light path without affecting the orientation of the image or deviating the light path.
- Used in Binoculars, Rangefinders and Measuring Instruments.
SCHIMIDT PRISM
- To rotate an image by 180°.
- Used in Binoculars, Microscopes and Survey Equipment.
PENTA PRISM
- To deviate the light path by 90° without affecting image orientation.
- Measuring Instruments and Surveying Equipments.
ROOF PRISM
- To invert and rotate image or retroreflect light.
- Used in Interferometry, Astronomy and Pattern Recognition.
DOVE PRISM
- To invert and rotate image or retroreflect light.
- Used in Interferometry, Astronomy and Pattern Recognition.
PORRO-ABBE PRISM
- To deviate the light path by 90° and rotate a vertical image horizontally.
- Used in Binoculars and Telescopes.
RETROREFLECTORS
- To reflects light back to its source with minimum scattering.
- Used in Interferometry, Rangefinder, Precision Alignment and Land Surveying Instrument.
BEAMSPLITTER CUBES
- To splits a light beam into two.
- Used in Fluorescence applications, Interferometry or Instrumentation.
CORNER CUBE
- To return an incoming beam of light back to its source irrespective of the course of entry.
- Used in Land Surveying Instrument, Range-finding, Satellite Communications and Laser application.